離心式氧氣壓縮機

　　Centrifugal oxygen compressor
　　離心式氧氣壓縮機
　　主要用于外壓縮空分流程氧氣壓縮
　　引進日立氧透全套技術，全新自主創新結構；
　　專門為壓氧而設計，三十多年專業離心式氧壓機設計制造經驗，保證氧壓機安全；
　　多腔差壓密封，防止氧氣介質的被污染和外泄漏；
　　與氧氣接觸材料的合理選擇；
　　氧氣流速和溫度的嚴格控制；
　　完備的安全控制和防喘振控制措施；
　　Mainly used for oxygen compression of external compression air separation process

膜盤聯軸器 Diaphragm coupling

　　Introduce the whole Hitachi oxygen turbine technology, brand new independent innovation structure;
　　Specially designed for oxygen compression. Maximumly guarantee the security of oxygen compressor with over 30 years’ professional designing and manufacturing experience of centrifugal oxygen compressors.;
　　Multi-cavity differential pressure seal to avoid the pollution and leakage of oxygen medium;
　　Reasonable selection of materials connecting with oxygen;
　　Strict control of oxygen flow rate and temperature;
　　Complete security control measures and anti-surge control measures;

氧透現場布置 Oxygen turbine site layout	可傾瓦軸承 Tilting-pad bearing

六萬中壓氧透
65,000Nm3/h Centrifugal oxygen compressor

氧透裝配中 Oxygen turbine compressor in assembly	氧透機殼鍍銅 Oxygen turbine compressor casing copper plating

6萬氧透 60,000 Nm3/h Oxygen turbine compressor	“中高壓離心式氧壓機的關鍵技術研究”獲得浙江省科技進步二等獎 “The research on key technology of middle-high pressure centrifugal oxygen compressor” won the second prize of Zhejiang Science and Technology Progress Award

現場運行的氧透 compressor on the site	機殼鍍銅 Casing copper plating

氧氣透平壓縮機譜系 Tree diagram of oxygen turbine compressor
此種壓縮機結構均為單軸型，根據排氣壓力大小的不同分為單缸和雙缸兩種類型 This compressor is single shaft type. According to different discharge pressure, it is divided into two types, single-cylinder type and double-cylinder type
單缸型 Single-cylinder type	<1.0MPa	3TYS72	3TYS85	3TYS96	3TYS130	3TYS140	3TYS160
雙缸型 Double-cylinder type	<4.0MPa	3TYS72+2TYS58	3TYS85+2TYS68	3TYS96+2TYS70	3TYS130+2TYS80	3TYS140+2TYS90	3TYS160+2TYS100
氧氣流量 ×103 Nm3/h Oxygen flow×103Nm3/h	6 12 17 28 40 75 100

　　表格僅供用戶參考，最終實際選型由制造商計算后提供。
　　The diagram is only for reference. The actual type is provided by the manufacturer after calculation.